Sailnovo Metal Detector, Give You A Better Purchase Experience
Are you ready for the treasure hunt? Here are some tips for you:
- Q:What should I do if the sensitivity of the metal detector is very low?
A:The accuracy may be affected by the following factors:
1.The depth of the target. In order to find deeply buried metals, you need to increase the SENS level. However, it may not be possible to detect metal more than 8 inches underground.
2.The size of the target. Tiny metals, such as needles, are not easily found. In this case, you can try to increase the sensitivity or decrease the DISC value.
3.Search method. If you go too fast, you may miss your goal. Please re-search the coil with a slow and uniform oscillation of the search coil.
- Q:What should I do if the metal detector keeps beeping?
A:There are generally three situations:
1.On highly mineralized land, even if there is no metal, the detector may beep. In this case, you can reduce the sensitivity or increase the DISC value. At the same time, please keep a certain distance between the search coil and the ground.
2.In areas full of metal debris, the detector may beep continuously. In this case, you can lower the DISC setting, and most nails or small iron pieces will be eliminated.
- Q:Can the battery be stored in the metal detector for a long time?
A:If you do not use the detector for a week or more, please remove the battery to avoid damage to the components of the detector due to battery leakage. If you do not use the detector for a week or more, please remove the battery to avoid damage to the components of the detector due to battery leakage.
- Q:When is it suitable for testing metal detectors?
A:Keep away from metal when testing, and do not test with detectors on the floor inside the building. There are often some metal substances in the floor, which will interfere with your test or completely mask the test signal.